| 文献号 | 中文题名 | 英文题名 |
| GB/T 1332-1991 | 载货汽车定型试验规程 | Trucks--Engineering approval evaluation program |
| GB 1495-2002 | 汽车加速行驶车外噪声限值及测量方法 | Limits and measurement methods for noise emitted by accelerating motor vethicles |
| GB/T 2977-1997 | 载重汽车轮胎系列 | Series of truck tyres |
| GB/T 3273-2005 | 汽车大梁用热轧钢板和钢带 | Hot-rolled steel plates(sheets)and strips for automobile frames |
| GB/T 3487-2005 | 汽车轮辋规格系列 | Rim contours for motor vehicles |
| GB/T 3730.1-2001 | 汽车和挂车类型的术语和定义 | Motor vehicles and trailers-Types-Terms and definitions |
| GB/T 3730.3-1992 | 汽车和挂车的术语及其定义 车辆尺寸 | Motor vehicles and towed vehicles--Dimensions of vehicles--Terms and definitions |
| GB/T 3798.1-2005 | 汽车大修竣工出厂技术条件 第1部分;载客汽车 | Technical requirements for completion and acceptance of vehicle overhaul Part 1:Passenger vehicle |
| GB/T 3798.2-2005 | 汽车大修竣工出厂技术条件 第2部分;载货汽车 | Technical requirements for completion and acceptance of vehicle overhaul Part 2:Goods vehicle |
| GB/T 3799.1-2005 | 商用汽车发动机大修竣工出厂技术条件 第1部分;汽油发动机 | Technical requirements for completion and acceptance of commercial vehicle engines overhaul Part 1:Gasoline engines |
| GB/T 3799.2-2005 | 商用汽车发动机大修竣工出厂技术条件 第2部分;柴油发动机 | Technical requirements for completion and acceptance of commercial vehicle engines overhaul Part 2:Diesel engines |
| GB 3847-2005 | 车用压燃式发动机和压燃式发动机汽车排气烟度排放限值及测量方法 | Limits and measurement methods for exhaust smoke from C.I.E. (Compression Ignition Engine) and vehicle equiped with C.I.E. |
| GB/T 4094.2-2005 | 电动汽车操纵件、指示器及信号装置的标志 | Electric vehicles-Symbols for control,indicators,and tell-tales |
| GB 4094-1999 | 汽车操纵件、指示器及信号装置的标志 | Motor vehicles--symbols for controls,indicators and tell-tales |
| GB/T 4095-2005 | 商用汽车辐板式车轮在轮毂上的安装尺寸 | Disc wheels for trucks.Dimensional characteristics of attachment on hub |
| GB/T 4352-1984 | 载货汽车运行燃料消耗量 | Fuel consumption for trucks in operation |
| GB/T 4353-1984 | 载客汽车运行燃料消耗量 | Fuel consumption for passenger vehicles in operation |
| GB/T 4501-1998 | 载重汽车轮胎耐久性试验方法 转鼓法 | Endurance test for truck and bus tyres--Drum method |
| GB 4599-1994 | 汽车前照灯配光性能 | Photometric characteristics of headlamps for motor vehicles |
| GB 4660-1994 | 汽车前雾灯配光性能 | Photometric characteristics of front fog lamps for motor vehicles |
| GB/T 4780-2000 | 汽车车身术语 | Terms for motor vehicle body |
| GB 4785-1998 | 汽车及挂车外部照明和信号装置的安装规定 | Prescription for installation of the external lighting and light signalliug devices for motor vehicles and their trailers |
| GB/T 4970-1996 | 汽车平顺性随机输入行驶试验方法 | Method of random input running test--Automotive ride comfort |
| GB/T 4971-1985 | 汽车平顺性名词术语和定义 | Terms and definitions--Automotive ride comfort |
| GB/T 5137.1-2002 | 汽车安全玻璃试验方法 第1部分;力学性能试验 | Road vehicles-safety glazing materials--Test methods for mechanical properties |
| GB/T 5137.2-2002 | 汽车安全玻璃试验方法 第2部分;光学性能试验 | Road vehicles-safety glazing materials-Test methods for optical properties |
| GB/T 5137.3-2002 | 汽车安全玻璃 试验方法 第3部分;耐辐照高温潮湿燃烧和耐模拟气候试验 | Road vehicles-safety glazing materials--Test methods for resistance to radiation,high temperature,humidity,fire and simulated weathering |
| GB/T 5137.4-2001 | 汽车安全玻璃太阳能透射比测定方法 | Road vehicles--Safety glazing materials--Method for the determination of solar transmittance |
| GB/T 5181-2001 | 汽车排放术语和定义 | Automotive emission-Terms and definitions |
| GB/T 5335-1985 | 汽车制动装置液压试验的连接器 | Automobile hydraulic pressure test connection for braking equipment |
| GB/T 5337-1985 | 汽车电器、灯具和仪表名词术语 | Nomenclature and terminology for automotive electrical equipment, lighting and instrumentation |
| GB/T 5620-2002 | 道路车辆 汽车和挂车 制动名词术语及其定义 | Road vehicles--Braking of automotive vehicles and their trailers--Vocabulary |
| GB/T 5624-2005 | 汽车维修术语 | Motor vehicle maintenance and repair terms |
| GB/T 5671-1995 | 汽车通用锂基润滑脂 | General purpose lithium base grease for automobile |
| GB 5763-1998 | 汽车用制动器衬片 | Brake linings for automobiles |
| GB/T 57-1998 | 汽车用离合器面片 | Clutch facings for automobiles |
| GB/T 5845.2-1986 | 城市公共交通标志 公共汽车标志 | Marks for urban public transport--Mark for bus |
| GB/T 5845.7-1986 | 城市公共交通标志 城市出租汽车标志 | Marks for urban public transport--Identification mark for taxi |
| GB/T 5845.11-1986 | 城市公共交通标志 公共汽车、无轨电车、有轨电车站牌 | Marks for urban public transport--Stop board of bus and trolleybus and tram car |
| GB/T 5845.13-19 | 城市公共交通标志 公共汽车、无轨电车、有轨电车路牌 | Marks for urban public transport Line number plate of bus trolleybus and tram |
| GB/T 5902-1986 | 汽车平顺性脉冲输入行驶试验方法 | Method of pulse input running test--Automobile ride comfort |
| GB/T 5909-1995 | 载货汽车车轮性能要求和试验方法 | Performance requirements and test methods of truck wheels |
| GB 5920-1999 | 汽车及挂车前位灯、后位灯、示廓灯和制动灯配光性能 | Photometric characteristics of front and Rear position lamps,end-outline marker lamps and stop lamps for motor vehicles and and their trailers |
| GB/T 5921-1986 | 汽车和挂车 气压制动系部件上接口的识别标记 | Motor vehicles and towed vehicles--Air braking systems--Identification of connections on units |
| GB/T 5922-1986 | 汽车和挂车 气压制动装置压力测试连接器 | Motor vehicles and towed vehicles--Pressure test connection for compressed-air pneumatic braking equipment |
| GB/T 5923-1986 | 汽车柴油机燃油滤清器的试验方法 | Test methods of fuel filters for automotive compression ignition engines |
| GB/T 6068.1-2005 | 汽车起重机和轮胎起重机试验规范 第1部分;一般要求 | Test code for truck crane and mobile crane Part 1:General requirements |
| GB/T 6068.2-2005 | 汽车起重机和轮胎起重机试验规范 第2部分;性能试验 | Test code for truck crane and mobile crane Part 2:Performance test |
| GB/T 6068.3-2005 | 汽车起重机和轮胎起重机试验规范 第3部分;结构试验 | Test code for truck crane and mobile crane Part 3:Structure test |
| GB/T 6323.1-1994 | 汽车操纵稳定性试验方法 蛇行试验 | Controllability and stability test procedure for automobiles- Pylon course slalom test |
| GB/T 6323.2-1994 | 汽车操纵稳定性试验方法 转向瞬态响应试验(转向盘转角阶跃输入) | Controllability and stability test procedure for automobiles- Steering transient response test (Steering wheel angle step input) |
| GB/T 6323.3-1994 | 汽车操纵稳定性试验方法 转向瞬态响应试验(转向盘转角脉冲输入) | Controllability and stability test procedure for automobiles-Steering transient response test (Steering wheel angle pulse input) |
| GB/T 6323.4-1994 | 汽车操纵稳定性试验方法 转向回正性能试验 | Controllability and stability test procedure for automobiles-Returnability test |
| GB/T 6323.5-1994 | 汽车操纵稳定性试验方法 转向轻便性试验 | Controllability and stability test procedure for automobiles-Steering efforts test procedure |
| GB/T 6323.6-1994 | 汽车操纵稳定性试验方法 稳态回转试验 | Controllability and stability test procedure for automobiles-Steady static circular test procedure |
| GB/T 6327-1996 | 载重汽车轮胎强度试验放方法 | Strength test method for truck and bus tyres |
| GB/T 6726-1986 | 货运汽车用冷弯型钢尺寸、外形、重量及允许偏差 | Cold forming sectional steel for cargo vehicle--Dimension, form, weight and permissible deviations |
| GB/T 6727-1986 | 客运汽车用冷弯型钢尺寸、外形、重量及允许偏差 | Cold forming sectional steel for passenger vehicle--Dimension, form, weight and permissible deviations |
| GB/T 7035-1993 | 轻型载重汽车轮胎高速性能试验方法 转鼓法 | High speed performence test for light truck tyres.Drum method |
| GB 7036.1-1997 | 充气轮胎内胎 第1部分;汽车轮胎内胎 | Inner tube of pneumatic tyres--Part 1: Inner tube of automobile tyres |
| GB 7063-1994 | 汽车护轮板 | The wheel guards of motor vehicles |
| GB 7128-1986 | 汽车气压制动胶管 | Rubber hose for automotive air brake system |
| GB 7524-1987 | 汽车液压制动橡胶皮碗 | Hydraulic brake rubber cups for automobiles |
| GB 8410-2006 | 汽车内饰材料的燃烧特性 | Flammability of automotive interior materials |
| GB 9656-2003 | 汽车安全玻璃 | Safety glazing materials for road vehicles |
| GB 9744-1997 | 载重汽车轮胎 | Truck tyres |
| GB/T 10414.2-2002 | 带传动 同步带传动 汽车同步带轮 | Belt drives--Synchronous beltdrives--Automotive pulleys |
| GB/T 10716-2000 | 汽车同步带物理性能试验方法 | Synchronous belt drives-Automotive belt-Determination of physical properties |
| GB 11340-2005 | 装用点燃式发动机重型汽车.曲轴箱污染物排放限值及测量方法 | Limits and measurement methods for crankcase pollutants From heavy-duty vehicles equipped with P.I engines |
| GB/T 11545-1996 | 汽车V带疲劳试验方法 | V-belt drives for the automotive industry--Fatigue test |
| GB 11550-1995 | 汽车座椅头枕性能要求和试验方法 | Motor vehicles--Seats head restraints--Performance requirements and test methods |
| GB 11554-1998 | 汽车及挂车后雾灯配光性能 | Photometric characteristics of rear fog lamp for motor vehicles and their trailers |
| GB 11555-1994 | 汽车风窗玻璃除雾系统的性能要求及试验方法 | Motor vehicles-Windshield demisters-Performance requirements and test methods |
| GB 11556-1994 | 汽车风窗玻璃除霜系统的性能要求及试验方法 | Motor vehicles-Windshield defrosters-Performance requirements and test methods |
| GB 11557-1998 | 防止汽车转向机构对驾驶员伤害的规定 | The stipulation protecting drivers from being injured by motor vehicle steering mechanism |
| GB 11562-1994 | 汽车驾驶员前方视野要求及测量方法 | Motor vehicles-Forward visibility for drivers-Requirements and measurement methods |
| GB 11567.1-2001 | 汽车和挂车侧面防护要求 | Motor vehicles and trailers--Lateral protection requirements |
| GB 11567.2-2001 | 汽车和挂车后下部防护要求 | Motor vehicles and trailers--Rear underrun protection requirements |
| GB 11568-1999 | 汽车罩(盖)锁系统 | Motor vehicles--Hood latch system |
| GB/T 11798.1-2001 | 机动车安全检测设备 检定技术条件 第1部分;滑板式汽车侧滑试验台检定技术条件 | Motor vehicle safety testing equipment Technical requirements of verification--Part 1: Technical requirements of verification for side slip tester of slipper type |
| GB/T 12534-1990 | 汽车道路试验方法通则 | Motor vehicles--General rules of road test method |
| GB/T 12535-2007 | 汽车起动性能试验方法 | |
| GB/T 12536-1990 | 汽车滑行试验方法 | Motor vehicles--Coastdown--Test method |
| GB/T 12537-1990 | 汽车牵引性能试验方法 | Motor vehicles--Towing performance--Test method |
| GB/T 12539-1990 | 汽车爬陡坡试验方法 | Motor vehicles--Steep hill climbing--Test method |
| GB/T 12540-1990 | 汽车最小转弯直径测定方法 | Motor vehicles--Minimum turning diameter--Method of measurment |
| GB/T 12541-1990 | 汽车地形通过性试验方法 | Motor vehicles--Passing topography capacity--Test method |
| GB/T 12542-1990 | 汽车发动机冷却系冷却能力道路试验方法 | Motor vehicles--Cooling capacity for engine cooling system--Test method on road |
| GB/T 12543-1990 | 汽车加速性能试验方法 | Motor vehicles--Acceleration performance--Test method |
| GB/T 12544-1990 | 汽车最高车速试验方法 | Motor vehicles--M!ximum speed--Test method |
| GB/T 12546-2007 | 汽车隔热通风试验方法 | |
| GB/T 12547-1990 | 汽车最低稳定车速试验方法 | Motor vehicles--Minimum stable speed--Test method |
| GB/T 12548-1990 | 汽车速度表、里程表检验校正方法 | Motor vehicles--Speedometer and odometer--Calibration method |
| GB/T 12549-1990 | 汽车操纵稳定性术语及其定义 | Automotive controllability and stability--Terms and definitions |
| GB/T 12673-1990 | 汽车主要尺寸测量方法 | Motor vehicles--Basic dimensions--Measuring method |
| GB/T 12674-1990 | 汽车质量(重量)参数测定方法 | Motor vehicles--Weight parameter--Measuring method |
| GB 12676-1999 | 汽车制动系统结构、性能和试验方法 | Road vehicle--Braking systems--Structure, performance and test methods |
| GB/T 12677-1990 | 汽车技术状况行驶检查方法 | Motor vehicles--Technical condition--Inspection method |
| GB/T 12678-1990 | 汽车可靠性行驶试验方法 | Reliability running test method for automobiles |
| GB/T 12679-1990 | 汽车耐久性行驶试验方法 | Motor vehicles--Durability running--Test method |
| GB 12732-1996 | 汽车V带 | Automotive V-belts |
| GB 12734-2003 | 汽车同步带 | Automotive synchronous belts |
| GB/T 12782-2007 | 汽车采暖性能要求和试验方法 | |
| GB/T 13061-1991 | 汽车悬架用空气弹簧 橡胶气囊 | Air spring for automotive suspension--Rubber bellows |
| GB/T 13352-1996 | 汽车V带尺寸 | Automotive V-belts--Dimensions |
| GB/T 13405-1992 | 汽车V带轮 | Grooved pulleys for automotive V-belt |
| GB/T 13492-1992 | 各色汽车用面漆 | Finish for automobiles |
| GB/T 13493-1992 | 汽车用底漆 | Primer for automobiles |
| GB 13552-1998 | 汽车多楔带 | Automotive V-ribbed belts |
| GB/T 13563-1992 | 滚筒式汽车车速表检验台 | Roller speedometer tester |
| GB/T 13563-2007 | 滚筒式汽车车速表检验台 | |
| GB/T 135-2005 | 滚筒反力式汽车制动检验台 | Roller opposite forces type automobile brake tester |
| GB 14167-2006 | 汽车安全带安装固定点 | Safety-belt anchorages for vehicles |
| GB/T 14168-1993 | 汽车制动液类别图形标志 | Motor vehicles--Graphical symbols to designate brake fluid types |
| GB/T 14172-1993 | 汽车静侧翻稳定性台架试验方法 | Static roll stability test method for motor vehicles |
| GB 14762-2002 | 车用点燃式发动机及装用点燃式发动机汽车 排气污染物排放限值及测量方法 | Limits and measurement methods for exhaust pollutants from positive ignition(P.I.)engines of vehicles and vehicles equipped with P.Iengines |
| GB 14763-2005 | 装用点燃式发动机重型汽车.燃油蒸发污染物排放限值及测量方法(收集法) | Limits and measurement methods for fuel evaporative Pollutants from heavy-duty vehicles equipped with P.I engines (Trap method) |
| GB/T 14951-2007 | 汽车节油技术评定方法 | |
| GB 15082-1999 | 汽车用车速表 | Motor vehicles--Speed meters |
| GB 15083-2006 | 汽车座椅 座椅固定装置及头枕强度要求和试验方法 | Strength requirement and test of automobile seats their anchorages and any head restraints |
| GB 15085-1994 | 汽车风窗玻璃刮水器、洗涤器的性能要求及试验方法 | Motor vehicles-Windshield wipers and washer systems-Performance reguirements and test methods |
| GB 15086-2006 | 汽车门锁及车门保持件的性能要求和试验方法 | Motor vehicles.Door locks and door retention components.Perfprmance requirements and methods |
| GB/T 15087-1994 | 汽车 牵引车与全挂车机械连接装置 强度试验 | Motor vehicles-Drawbar couplings and eyes for hinged drawbars-Strength test |
| GB/T 15088-1994 | 汽车 半挂车牵引座牵引销 强度试验 | Motor vehicles-Fifth wheel coupling pins-Strength test |
| GB 15235-1994 | 汽车倒车灯配光性能 | Photometric characteristics of reversing lamps for motor vehicles and their trailers |
| GB/T 15705-1995 | 载货汽车驾驶员操作位置尺寸 | Trucks--Operating position dimensions of driver |
| GB 15740-2006 | 汽车防盗装置 | Protective devices against unauthorized use of motor vehicles |
| GB 15741-1995 | 汽车和挂车号牌板(架)及其位置 | The license plates(crackets)and its position on motor vehicles and trailer |
| GB/T 15746.1-1995 | 汽车修理质量检查评定标准 整车大修 | The standard of qualitative assessment for vehicle repair--Major of vehicles |
| GB/T 15746.2-1995 | 汽车修理质量检查评定标准 发动机大修 | The standard of qualitative assessment for vehicle repair--Major repair of automobile engines |
| GB/T 15746.3-1995 | 汽车修理质量检查评定标准 车身大修 | The standard of qualitative assessment for vehicle repair--Major repair of bodies |
| GB 16170-1996 | 汽车定置噪声限值 | Limits of noise emitted by stationary road vehicles |
| GB 187.13-2005 | 进口可用作原料的同体废物环境保护控制标准 废汽车压件 | Environmental protection control standard for imported solid wastes as raw materials -- compressed piece of scrap automobile |
| GB/T 16570-1996 | 汽车柴油机架装直列式喷油泵 安装尺寸 | Motor vehicles cradle-mounted in-line fuel injection pumps for diesel engimes--Mounting dimensions |
| GB/T 16739.1-2004 | 汽车维修业开业条件 第1部分;汽车整车维修企业 | Certification requirements for motor vehicle maintenance and repair enterprise Part 1:for motor vehicle maintenance and repair |
| GB/T 16739.2-2004 | 汽车维修业开业条件 第2部分;汽车专项维修业户 | Certification requirements for motor vehicle maintenance and repair enterprise Part2:for maintenance and repair of special items |
| GB 17258-1998 | 汽车用压缩天然气钢瓶 | Steel cylinders for the on-board of compressed natural gas as a fuel for vehicles |
| GB/T 17339-1998 | 汽车安全玻璃耐化学浸蚀性和耐温度变化性试验方法 | Road vehicles--Safety glazing materials--Test methods for resistant-to-chemicals and resistant-to-temperature changes |
| GB/T 17340-1998 | 汽车安全玻璃的尺寸、形状及外观 | Road vehicles--Safety glasses--Dimensions, shapes and appearances |
| GB/T 17349.1-1998 | 道路车辆 汽车诊断系统 词汇 | Road vehicles--Diagnostic system for motor vehicles--Vocabulary |
| GB/T 17349.2-1998 | 道路车辆 汽车诊断系统 图形符号 | Road vehicle--Diagnostic system--Graphical symbols |
| GB/T 17350-1998 | 专用汽车和专用半挂车术语和代号 | Terms and marks in special automobiles and semi-trailers |
| GB/T 17351-1998 | 汽车车轮 双轮中心距 | Dual spacing of vechicle wheels |
| GB 17354-1998 | 汽车前、后端保护装置 | Front and rear protective devices for passenger cars |
| GB/T 17469-1998 | 汽车制动器衬片摩擦性能评价 小样台架试验方法 | Road vehicles--Brake linings--Evaluation of friction material characteristics--Small sample bench test procedure |
| GB 17509-1998 | 汽车和挂车转向信号灯配光性能 | Photometric characteristics of direction indicators for motor vehicles and their trailers |
| GB 17675-1999 | 汽车转向系基本要求 | Steering system of motor vehicles-Basic requirements |
| GB/T 17676-1999 | 天然气汽车和液化石油气汽车 标志 | Natural gas vehicle and liquefied petroleum gas vehicle Identification marks |
| GB 17691-2005 | 车用压燃式、气体燃料点燃式发动机与汽车排气污染物排放限值及测量方法(中国Ⅲ、Ⅳ、Ⅴ阶段) | Limits and measurement methods for exhaust pollutants from compression ignition and gas fuelled positive ignition engines of vehicles (Ⅲ,Ⅳ,Ⅴ) |
| GB/T 17692-1999 | 汽车用发动机净功率测试方法 | Measurement methods of net power for automotive engines |
| GB/T 175-1999 | 天然气汽车和液化石油气汽车 词汇 | Natural gas vehicle and liquefied petroleum gas vehicle--Vocabulary |
| GB/T 17929-1999 | 汽车用石英钟 | Quartz clocks for vehices |
| GB/T 17993-2005 | 汽车综合性能检测站能力的通用要求 | General requirements for the competence of automotive multiple-function test station |
| GB 18075-2000 | 汽车制造厂卫生防护距离标准 | Health protection zone standard for auto-mobile factory |
| GB 18099-2000 | 汽车及挂车侧标志灯配光性能 | Photometric characteristics of side-marker lamps for motor vehicles and their trailers |
| GB/T 18183-2000 | 汽车同步带疲劳试验方法 | Automotive synchronous belt industry-Fatigue test |
| GB/T 18274-2000 | 汽车鼓式制动器修理技术条件 | Technical specifications for motor vehicle drum brake being overhauled |
| GB/T 18275.1-2000 | 汽车制动传动装置修理技术条件 气压制动 | Specifications for automobile braking transmission device being overhauled Air braking |
| GB/T 18275.2-2000 | 汽车制动传动装置修理技术条件 液压制动 | Specifications for automobile braking transmission device being overhauled Hydraulic braking |
| GB/T 18276-2000 | 汽车动力性台架试验方法和评价指标 | Test-bed methods and evaluating index of dynamic property for motor vehicles |
| GB 18285-2005 | 点燃式发动机汽车排气污染物排放限值及测量方法(双怠速法及简易工况法) | Limits and measurement methods for exhaust pollutants from vehicles equipped ignition engine under two-speed idle conditions and simple driving mode conditions |
| GB 18296-2001 | 汽车燃油箱 安全性能要求和试验方法 | Safety property requirements and test methods for automobile fuel tank |
| GB/T 18297-2001 | 汽车发动机性能试验方法 | Performance test code for road vehicle engines |
| GB/T 18305-2003 | 质量管理体系 汽车生产件及相关维修零件组织应用GB/T 19001-2000的特别要求 | Quality management systems--Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations |
| GB/T 18343-2001 | 汽车盘式制动器修理技术条件 | Specification for automobile disk brakes being overhauled |
| GB/T 18344-2001 | 汽车维护、检测、诊断技术规范 | Specification for the inspection and maintenance of motor vehicle |
| GB 18352.1-2001 | 轻型汽车污染物排放限值及测量方法(I) | Limits and measurement methods for emissions from light-duty vehicles(Ⅰ) |
| GB 18352.3-2005 | 轻型汽车污染物排放限值及测量方法(中国Ⅲ、Ⅳ阶段) | Limits and measurement methods for emissions from light-duty vehicles (Ⅲ, Ⅳ) |
| GB/T 18363-2001 | 汽车用压缩天然气加气口 | Filling receptacle of CNG vehicle |
| GB/T 183.1-2001 | 汽车用液化石油气加气口(螺旋式) | Filling receptacle of LPG vehicle (spiral) |
| GB/T 183.2-2005 | 汽车用液化石油气加气口 第2部分;快插式 | Filling receptacle of LPG vehicle-Part 2:Insert |
| GB/T 18384.1-2001 | 电动汽车 安全要求 第1部分;车载储能装置 | Electric vehicles--Safety specification--Part 1: On-board energy storage |
| GB/T 18384.2-2001 | 电动汽车 安全要求 第2部分;功能安全和故障防护 | Electric vehicles--Safety specification--Part 2: Functional safety means and protection against failures |
| GB/T 18384.3-2001 | 电动汽车 安全要求 第3部分;人员触电防护 | Electric vehicles--Safety specification--Part 3: Protection of persons against electric hazards |
| GB/T 18385-2005 | 电动汽车 动力性能 试验方法 | Electric vehicles Power performance Test method |
| GB/T 18386-2005 | 电动汽车 能量消耗率和续驶里程 试验方法 | Electric vehicles Energy consumption and range Test procedures |
| GB/T 18388-2005 | 电动汽车 定型试验规程 | Electric vehicles-Engineering approval evaluation program |
| GB 18408-2001 | 汽车及挂车后牌照板照明装置配光性能 | Photometric characteristics of devices for the illumination of rear registration plates of motor vehicles and their trailers |
| GB 18409-2001 | 汽车驻车灯配光性能 | Photometric characteristics of parking lamps for power-driven vehicles |
| GB/T 18437.1-2001 | 燃气汽车改装技术要求 压缩天然气汽车 | The technical criterion of refitting for vehicle by using gas--Compressed natural gas for vehicle(CNGV) |
| GB/T 18437.2-2001 | 燃气汽车改装技术要求 液化石油气汽车 | The technical criterion of refitting for vehicle by using gas--Liquefied petroleum gas vehicle(LPGV) |
| GB/T 18488.1-2006 | 电动汽车用电机及其控制器 第1部分:技术条件 | The electrical machines and controllers for electric vehicles Part 1: General specification |
| GB/T 18488.2-2006 | 电动汽车用电机及其控制器 第2部分:试验方法 | The electrical machines and controllers for electric vehicles Part 2: Test methods |
| GB/T 18505-2001 | 汽车轮胎动平衡试验方法 | Dynamic balance test method for motor vehicle tyres |
| GB/T 18506-2001 | 汽车轮胎均匀性试验方法 | Uniformity test method for motor vehicle tyres |
| GB 185-2001 | 汽车运输液体危险危险货物常压容器(罐体)通用技术条件 | General specification for normal pressure tank body of transportation liquid dangerous goods |
| GB/T 18697-2002 | 声学 汽车车内噪声测量方法 | Acoustics--Measurement of noise inside motor vehicles |
| GB/T 18861-2002 | 汽车轮胎滚动阻力试验方法 | Test methods of rolling resistance for motor vehicle tyres |
| GB/T 19047-2003 | 增强型载重汽车轮胎 | Reinforced truck tyres |
| GB/T 19055-2003 | 汽车发动机可靠性试验方法 | Reliability test methods for motor vehicle engines |
| GB/T 19056-2003 | 汽车行驶记录仪 | Vehicle travelling data recorder |
| GB/T 19233-2003 | 轻型汽车燃料消耗量试验方法 | Measurement methods of fuel consumption for light-duty vehicles |
| GB/T 19237-2003 | 汽车用压缩天然气加气机 | Compressed natural gas dispenser for vehicle |
| GB/T 19238-2003 | 汽车用液化石油气加气机 | Liquefied petroleum gas dispenser for vehicle |
| GB/T 19239-2003 | 液化石油气汽车专用装置的安装要求 | Mounting requirements of special equipment for liquefied petroleum gas vehicles |
| GB/T 19240-2003 | 压缩天然气汽车专用装置的安装要求 | Mounting requirements of special equipment for compressed natural gas vdhicles |
| GB 19344-2003 | 在用燃气汽车燃气供给系统泄漏安全技术要求及检验方法 | Technique requirement and test method of leaking-safety of gas supply system on using gas vehicle |
| GB/T 193-2003 | 载重汽车轮胎滚动周长试验方法 | Test method of measuring rolling circumference for truck tyres |
| GB/T 19392-2003 | 汽车GPS导航系统通用规范 | General specification for in-vehicle GPS navigation system |
| GB 19533-2004 | 汽车用压缩天然气钢瓶定期检验与评定 | Periodic inspection and evaluation of steel gas cylinders for the on board storage of compressed natural gas as a fuel |
| GB/T 19596-2004 | 电动汽车术语 | Terminology of electric vehicles |
| GB/T 19750-2005 | 混合动力电动汽车 定型试验规程 | Hybrid electric vehicles-Engineering approval evaluation program |
| GB/T 19751-2005 | 混合动力电动汽车安全要求 | Hybrid electric vehicles safety specification |
| GB/T 19752-2005 | 混合动力电动汽车 动力性能 试验方法 | Hybrid electric vehicles.Power performance.Test method |
| GB/T 19753-2005 | 轻型混合动力电动汽车 能量消耗量 试验方法 | Test methods for energy consumption of Light-duty Hybrid Electric Vehicles |
| GB/T 19754-2005 | 重型混合动力电动汽车 能量消耗量 试验方法 | Test methods for energy consumption of heavy-duty hybrid electric vehicles |
| GB/T 19755-2005 | 轻型混合动力电动汽车 污染物排放 测量方法 | Measurement methods for emissions from light-duty hybrid electric vehicles |
| GB 19756-2005 | 三轮汽车和低速货车用柴油机排气污染物排放限值及测量方法(中国Ⅰ、Ⅱ阶段) | Limits and measurement methods for exhaust pollutants from diesel engines of tri - wheel & low - speed goods vehicles |
| GB 19757-2005 | 三轮汽车和低速货车加速行驶车外噪声限值及测量方法(中国Ⅰ、Ⅱ阶段) | Limits and measurement methods for noise emitted by accelerating tri - wheel and low - speed vehicle |
| GB/T 19836-2005 | 电动汽车用仪表 | Instrumentation for electric vehicles |
| GB/T 19910-2005 | 汽车发动机电子控制系统修理技术要求 | Technical requirements for electronic control system of motor-vehicles engine being overhauled |
| GB/T 20025.2-2005 | 汽车空调用橡胶和塑料软管及软管组合件 耐制冷剂134a | Rubber and plastics hoses and hose assemblies for automotive air conditioning.Refrigerant 134a |
| GB 20071-2006 | 汽车侧面碰撞的乘员保护 | The protection of the occupants in the event of a lateral collision |
| GB/T 20234-2006 | 电动汽车传导充电用插头、插座、车辆耦合器和车辆插孔通用要求 | Plugs, socket-outlets, vehicle coupers and vehicle inlets for conductive charging of electric vehicles - General requirements |
| GB/T 20461-2006 | 汽车动力转向系统用橡胶软管和软管组合件.规范 | Rubber hoses and hose assemblies for automobile power-steering systems.Specification |
| GB/T 20462.1-2006 | 汽车用热塑性非增强软管和软管.第1部分; 非燃油用 | Thermoplastic tubing and hoses for automotive use.Part 1:Non-fuel applications |
| GB/T 20462.2-2006 | 汽车用热塑性非增强软管和软管.第2部分;石油基燃油用 | Thermoplastic tubing and hoses for automotive use.Part 2:Petroleum-based-fuel applications |
| GB/T 205.1-2007 | 汽车用高强度冷连轧钢板及钢带 第1部分：烘烤硬化钢 | |
| GB/T 205.2-2006 | 汽车用高强度冷连轧钢板及钢带 第2部分:双相钢 | Continuously cold rolled high strength steel sheet and strip for automobile. Part 2: Dual phase steel |
| GB/T 205.3-2007 | 汽车用高强度冷连轧钢板及钢带 第3部分：高强度无间隙原子钢 | |
| GB/T 20734-2006 | 液化天然气汽车专用装置安装要求 | Mounting requirements for liquefied natural gas vehicle special equipment |
| GB/T 20735-2006 | 汽车用压缩天然气减压调节器 | Pressure regulator of CNG vehicles |
| GB/T 20887.1-2007 | 汽车用高强度热连轧钢板及钢带 第1部分：冷成形用高屈服强度钢 | |
| GB 200-2007 | 重型汽车排气污染物排放控制系统耐久性要求及试验方法 | |
| GB 20912-2007 | 汽车用液化石油气蒸发调节器 | |
| GB 50067-1997 | 汽车库、修车库、停车场设计防火规范 | Code for fire protection design of garage, motor-repair-shop and parking-area |
| GB 50156-2002 | 汽车加油加气站设计与施工规范(2006年版) | Code for design and construction of automobile gasoline and gas filling station |
| AQ 3001-2005 | 汽车加油(气)站、轻质燃油和液化石油气汽车罐车用阻隔防爆储罐技术要求 | Technology-Separate and explosion-proof of gasoline, gas filling station and light-fuel, LPG tank of transportation by truck |
| AQ 3002-2005 | 阻隔防爆橇装式汽车加油(气)装置技术要求 | Technology-Separate and explosion-proof of auto gasoline, gas filling portable device |
| AQ 3003-2005 | 危险化学品汽车运输安全监控系统通用规范 | General specification on monitoring system for dangerous chemicals in road transport |
| AQ 3004-2005 | 危险化学品汽车运输安全监控车载终端 | Telematics control unit monitoring safety of on-road vehicle transportation of dangerous chemical goods |
| AQ 3006-2007 | 危险化学品汽车运输 安全监控车载终端安装规范 | |
| AQ 3007-2007 | 危险化学品汽车运输 安全监控系统 车载终端与通信中心间数据接口协议和数据交换技术 | |
| AQ 3008-2007 | 危险化学品汽车运输 安全监控系统通信中心与运营控制中心、客户端监控中心间数据接口和数据交换技术规范 | |
| HJ/T 241-2005 | 确定压燃式发动机在用汽车加载减速法排气烟度排放限值的原则和方法 | The principle and method of confirm limits for exhaust smoke from lug-down mode for in-use motor vehicles with C.I.E. (compression ignition engine) |
| HJ/T 293-2006 | 清洁生产标准.汽车制造业（涂装） | Cleaner production standard.Automobile manufacturing(Painting) |
| JT/T 27.1-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车驾驶员 | |
| JT/T 27.2-1993 | 交通行业工人技术等级标准 公路运输与公路养护 超重型汽车列车驾驶员 | |
| JT/T 27.3-1993 | 交通行业工人技术等级标准 公路运输与公路养护 超重型汽车列车挂车工 | |
| JT/T 27.5-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车客运调度员 | |
| JT/T 27.6-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车客运广播员 | |
| JT/T 27.7-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车客运行包员 | |
| JT/T 27.8-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车售票员 | |
| JT/T 27.9-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车客运危险品检查员 | |
| JT/T 27.10-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车客运服务员 | |
| JT/T 27.11-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车客运乘务员 | |
| JT/T 27.12-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车客运行包装卸工 | |
| JT/T 27.13-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车货运站场调度员 | |
| JT/T 27.14-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车货运站务员 | |
| JT/T 27.16-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车油料工 | |
| JT/T 27.17-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车货运库工 | |
| JT/T 27.18-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车维修工 | |
| JT/T 27.19-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车发动机维修工 | |
| JT/T 27.20-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车底盘维修工 | |
| JT/T 27.21-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车维修检验工 | |
| JT/T 27.22-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车维修电工 | |
| JT/T 27.23-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车维修漆工 | |
| JT/T 27.24-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车维修轮胎工 | |
| JT/T 27.25-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车维修钣金工 | |
| JT/T 27.26-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车维修铁工 | |
| JT/T 27.27-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车维修焊工 | |
| JT/T 27.28-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车维修钳工 | |
| JT/T 27.29-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车维修散热器工 | |
| JT/T 27.30-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车喷油泵调试工 | |
| JT/T 27.31-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车液压装置维修工 | |
| JT/T 27.32-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车维修镗磨工 | |
| JT/T 27.33-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车维修木工 | |
| JT/T 27.34-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车空调维修工 | |
| JT/T 27.35-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车蓄电池维修工 | |
| JT/T 27.36-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车维修缝工 | |
| JT/T 27.37-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车维修粘接工 | |
| JT/T 27.38-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车维修材料工 | |
| JT/T 27.39-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车零件清洗工 | |
| JT/T 27.40-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车检测工 | |
| JT/T 27.41-1993 | 交通行业工人技术等级标准 公路运输与公路养护 汽车检测设备维修工 | |
| JT/T 155-2004 | 汽车举升机 | Automobile lift |
| JT/T 200-2004 | 汽车客运站级别划分和建设要求 | Classification and construction requirement of passenger station |
| JT 225-1996 | 汽车发动机冷却液安全使用技术条件 | Specifications of safe using automobile engine coolant fuild |
| JT 230-1995 | 汽车导静电橡胶拖地带 | Rubber belt of electrostatic conductivity for motor vehicle |
| JT/T 290-1995 | 喷射式汽车外部清洗机 | Cold water pressure cleaner |
| JT 296-1996 | 汽车客运站卫生标准 | Hygienic standard for passenger coach station |
| JT/T 299-1996 | 汽车车轮螺母拆装机、汽车钢板弹簧U形螺栓拆装机 | Disassembly and reassembly machine for automotive wheel nut.Disassembly and reassembly machine for U-bolt of automotive leaf spring |
| JT/T 306-1997 | 汽车节能产品使用技术条件 | Technical specification of automobile fuel saving products |
| JT/T 309-1997 | 汽车客运站(点)代码 | Code for bus terminal and stop |
| JT/T 310-1997 | 汽车客运站计算机售票管理信息系统规范 | Specification of computerized ticket-selling management information system for bus terminal |
| JT/T 319-1997 | 汽车客运站计算机售票票样及管理使用规定 | Specification for bus terminal computerized ticket format and management |
| JT/T 324-1997 | 汽车喷烤漆房通用技术条件 | General requirements for automobile spray booth |
| JT/T 378-2005 | 汽车驾驶培训模拟器 | Automobile driving training simulator |
| JT/T 381-1998 | 汽车客票条码 | Bar code for passenger ticket of vehicle |
| JT/T 386-2004 | 汽车排气分析仪 | Analyzer for vehicle emission pollutant |
| JT/T 402-1999 | 汽车货运站(场)级别划分和建设要求 | Classification and construction requirement of freight terminal |
| JT/T 417-2000 | 汽车客运线路代码 | Code for Bus Terminal Route |
| JT/T 418-2000 | 汽车客运站计算机售票行包票样 | Luggage Ticket Format for Computerized Ticket of Bus Terminals |
| JT/T 425-2000 | 汽车维修业质量检验人员技术水平要求 | Technical standard requirement for technicians in charge of quality-inspection of auto maintenance and repair |
| JT/T 426-2000 | 汽车列车性能要求及试验方法 | Combination of vehicle performance requirements and test method |
| JT/T 442-2001 | 职业汽车驾驶员适宜性检测评价方法 | Appraisal way of automobile driving suitability test |
| JT/T 445-2001 | 汽车底盘测功机通用技术条件 | General specifications for automotive chassis dynamometers |
| JT/T 448-2001 | 汽车悬架装置检测台 | Automotive suspension tester |
| JT/T 473-2002 | 汽车货运站（场）代码编制规则 | Coding rules for freight terminal |
| JT/T 478-2002 | 汽车检测站计算机控制系统技术规范 | Technical specifications for computer controll system of vehicle inspecting station |
| JT/T 503-2004 | 汽车发动机综合检测仪 | Automobile engine multi-analyzer |
| JT/T 507-2004 | 汽车测滑检验台 | Automobile side slip tester |
| JT/T 510-2004 | 汽车防抱制动系统检测技术条件 | Technical specifications for vehicles anti-lock braking systems test |
| JT/T 511-2004 | 液化石油气汽车维护、检测技术规范 | Specification for the maintenance and inspection of liquefied petroleum gas vehicle |
| JT/T 512-2004 | 压缩天然气汽车维护、检测技术规范 | Specification for the maintenance and inspection of compressed natural gas vehicle |
| JT/T 604-2004 | 汽车号牌视频自动识别系统 | Automatic vehicle license plate video recognition system |
| JT 617-2004 | 汽车运输危险货物规则 | The regulation of automobile transportation of dangerous goods |
| JT 618-2004 | 汽车运输、装卸危险货物作业规程 | Rules of transportation, loading and unloading of dangerous goods by automobile |
| JT/T 619-2005 | 汽车货物运输质量主要考核指标 | The main assessment index for freight transport by road |
| JT/T 620-2005 | 汽车快件货物运输操作规程 | Operation regulations on express freight transport by road |
| JT/T 632-2005 | 汽车故障电脑诊断仪 | Computer monitor for vehicle trouble diagnosis |
| JT/T 633-2005 | 汽车悬架转向系间隙检查仪 | Automotive suspension and steering clearance tester |
| JT/T 634-2005 | 汽车前轮转向角检验台 | Automotive front-wheel turning angle tester |
| JT/T 638-2005 | 汽车发动机电喷嘴清洗检测仪 | Cleaning and detecting instrument for spray nozzles of vehicle engine |
| JT/T 639-2005 | 汽车车体校正机 | Autobody and frame alignment machine |
| JT/T 0-2005 | 汽车维修行业计算机管理信息系统技术规范 | Technical specification of management information systems for automobile maintenance and repair trade |
| JT/T 8-2006 | 汽车运输货物条码编码规则 | The rules of bar code for freight transport by vehicle |
| JT/T 9-2006 | 多功能汽车制动性能检测台 | Multi-function automobile brake tester |
| JT 3119-1985 | 北京BJ 212轻型越野汽车修理技术条件 | |
| JB 8716-1998 | 汽车起重机和轮胎起重机安全规程 | Truck crane and wheel crane-Safety code |
| JB/T 25-1999 | 汽车万向节十字轴总成.技术条件 | Specifications of automabile U-joint cross assembly |
| JB/T 9135-1999 | 中型载重汽车铁基粉末冶金制动磨擦片 | Ferrous powder metallurgy brake friction lining of medium load automobile |
| JB/T 9138-1999 | 汽车减震器铁基粉末冶金零件.技术条件 | Sintered iron-based automotive shock-absorbers.Specifications |
| JB/T 9737.1-2000 | 汽车起重机和轮胎起重机液压油.固体颗粒污染等级 | Truck crane and wheel crane.Contaminant grade of solid particle in hydraulic fluid |
| JB/T 9737.2-2000 | 汽车起重机和轮胎起重机液压油.固体颗粒污染测量方法 | Truck crane and wheel crane.Determination of solid particle contamination in the hydraulic fluid |
| JB/T 9737.3-2000 | 汽车起重机和轮胎起重机液压油选择与更换 | Truck crane and wheel crane.Chosing and replacing of the hydraulic fluid |
| JB/T 9738-2000 | 汽车起重机和轮胎起重机.技术要求 | Truck crane and wheel crane.Technical requirements |
| JB/T 9739.1-2000 | 汽车起重机和轮胎起重机.平衡阀 | Truck crane and wheel crane.Counterbalance valve |
| JB/T 9739.2-2000 | 汽车起重机和轮胎起重机.滑轮 | Truck crane and wheel crane.Sheave |
| JB/T 10170-2000 | 汽车起重机和轮胎起重机.起升机构试验规范 | Truck crane and wheel crane.Test code of hoist mechanism |
| JB/T 10188-2000 | 汽车转向节用推力轴承 | Thrust bearing for auto king pin |
| JB/T 101-2000 | 汽车用等速万向节及其总成 | Constant velocity universal joints and assemblies for automobiles |
| JB/T 10238-2001 | 汽车轮毂轴承单元 | Automotive wheel bearing units |
| JB/T 10284-2001 | 汽车空调用暖风水阀 | Wattervent-heating for automobile air-conditioning |
| JB/T 10298-2001 | 汽车加气站用天然气压缩机 | The natural gas compressor for the vehicle gas station |
| JB/T 10511-2005 | 三轮汽车和低速货车.标牌 | Tri-wheel vehicles and low-speed goods vehicles - Manufacturer's plate |
| JB/T 10512-2005 | 三轮汽车和低速货车.传动轴总成技术条件 | Tri-wheel vehicles and low-speed goods vehicles - Technical requirements for transmission shaft assembly |
| JB/T 10514-2005 | 三轮汽车和低速货车.钢板弹簧技术条件 | Tri-wheel vehicles and low-speed goods vehicles - Technical requirements for leaf spring |
| JB/T 10515-2005 | 三轮汽车和低速货车.液压制动轮缸技术条件 | Tri-wheel vehicles and low-speed goods vehicles - Technical requirements for hydraulic brake wheel jar |
| QC/T 695-2002 | 汽车通用继电器 | |
| QC/T 696-2002 | 汽车底盘集中润滑系统技术要求 | |
| QC/T 703-2004 | 汽车转向盘聚氨酯泡沫包覆层技术条件 | Specification of PU foam wrap layer for auto steering-wheel |
| QC/T 704-2004 | 汽车转向盘聚氨酯泡沫包覆层整体硬度试验方法 | Test method of PU foam wrap layer integer hardness for auto steering-wheel |
| QC/T 708-2004 | 汽车空调风机技术条件 | Technical specification of blower of air conditioner for motor vehicles |
| QC/T 709-2004 | 汽车密封条压缩永久变形试验方法 | Test method of compression set for automobile weatherstrips |
| QC/T 710-2004 | 汽车密封条压缩负荷试验方法 | Test method of compression load for automobile weather-strips |
| QC/T 711-2004 | 汽车密封条植绒耐磨性试验方法 | Test method of abrasion of flock for automotive weather-strip |
| QC/T 712-2004 | 汽车安全带装置固定连接用焊接螺母 | Weld nuts for fixing the safety belt devices of vehicle |
| QC/T 714-2004 | 汽车车身覆盖件未注形状与位置公差值 | General geometrical tolerances for cover panel of vehicle body |
| QC/T 715-2004 | 汽车用螺纹连接副摩擦系数的测试方法 | Measuring method for friction coefficient of screw thread pair of automobiles |
| QC/T 716-2004 | 汽车密封条插入力和拔出力试验方法 | Retention strength and insertion resistance test method for automobile weatherstrips |
| QC/T 717-2004 | 汽车车轮跳动量的要求和检测方法 | Run out requirements and measuring methods of automotive wheels |
| QC/T 720-2004 | 汽车空调术语 | Auto air condition vocabulary |
| QC/T 721-2004 | 汽车用锌铝铬涂层 | Zinc/Al/Chromate coatings for automobiles |
| QC/T 727-2004 | 汽车、摩托车用仪表 | Instrument for automobile and motorcycle |
| QC/T 728-2005 | 汽车整车大气暴露试验方法 | Road vehicel - Test method of exposure to weathering |
| QC/T 729-2005 | 汽车用交流发电机技术条件 | Automotive altenator technical specification |
| QC/T 730-2005 | 汽车用薄壁绝缘低压电线 | Road vehicle - Low tension cables with thin wall insulated |
| QC/T 731-2005 | 汽车用起动机技术条件 | Automotive starting motor specification |
| QC/T 742-2006 | 电动汽车用铅酸蓄电池 | Lead--acid batteries for electric vehicles |
| QC/T 743-2006 | 电动汽车用锂离子蓄电池 | Lithium--ion batteries for electric vehicles |
| QC/T 744-2006 | 电动汽车用金属氢化物镍蓄电池 | Nickel--metal hydride batteries for electric vehicles |
| QC/T 745-2006 | 液化石油气汽车橡胶管路 | Rubber pipelines for liquefied petroieum gas vehicles |
| QC/T 746-2006 | 压缩天然气汽车高压管路 | High pressure pipelines for compressed natural vehicles |
| QC/T 747-2006 | 汽车发动机硅油风扇离合器技术条件 | Specifications of viscous fan clutch for automotive engines |
| QC/T 748-2006 | 汽车发动机气门--气门座强化磨损台架试验方法 | The bench test methods of valve-valve holder intensify abrasion for automotive engines |
| QC/T 754-2006 | 汽车空气滤清器接头A型和B型 | |
| QC/T 756-2006 | 汽车 发动机旋装式机油滤清器 连接尺寸 | |
| QC/T 757-2006 | 汽车液压制动系 金属管、内外螺纹管接头和软管端部接头 | |
| QC/T 758-2006 | 载货汽车空气滤清器滤芯尺寸规范 | |
| QC/T 760-2006 | 汽车 柴油机旋装式燃油滤清器 安装和连接尺寸 | |
| QC/T 761-2006 | 汽车空气滤清器接头A型和B型 | |
| QC/T 763-2006 | 汽车发动机旋装式机油滤清器连接尺寸 | |
| QC/T 7-2006 | 汽车液压制动系金属管、内外螺纹管接头和软管端部接头 | |
| QC/T 765-2006 | 载货汽车空气滤清器滤芯尺寸规范 | |
| QC/T 767-2006 | 汽车 柴油机旋装式燃油滤清器安装和连接尺寸 | |
| QC/T 769-2006 | 汽车燃气加热器 | |
| QC/T 770-2006 | 汽车用干式空气滤清器总成技术条件 | |
| QC/T 771-2006 | 汽车柴油机纸质滤芯柴油细滤器总成技术条件 | |
